Jim Costa doesn't have an address that you can find on google maps, but tucked back in the woods next to the Greenbrier River in West Virginia, he has amassed an amazing collection of Appalachian life that's as good as any museum collection you'll see. Banjo builder Pete Ross and I went there to pick up two antique banjos made by Baltimorean William Boucher, Jr. for an upcoming exhibit at the Baltimore Museum of Industry.
Jim Costa's cabin near Talcott, West Virginia. "Jimmy World," as his friend likes to call the property, has a store building that he saved from destruction, a wood shop, a blacksmith shop, and a large garage/ barn, that are pretty full to the brim with amazing antique instruments, tools, furniture, and machinery.
A box (or tape loom). This little rigid heddle loom was attached to a box that provided half of the tension of a loom. The threads that were not woven would be wrapped around the bar in the box (warp beam) and go through the little holes and slots in the tall piece (rigid heddle). On the other side of the rigid heddle, the weft passes over and under threads to form a woven band or tape. That end needs to be fastened to something (a bed post, a tree, the person weaving) to create tension that holds everything in place.
String heddles. Heddles on modern looms are usually metal, but string was common on older looms when metal was more valuable. Each string would be tied to have a loop in the middle where the long warp threads would go through. The heddles are connected to frames that lift up (or push down) so that the weft yarn can pass over and under warp yarns easily.
A reed made from actual grass reeds. They sit in between two pieces of wood that are split down the middle. The reeds stay in place with string, that was sometimes dipped in tar to keep it from unraveling. The closer the individual reeds are to each other, the denser the weaving. Some of Jim's reeds measured in at 80 dent (spaces) per inch (compare that to the 10 dent reed I have!). Of course, you can always double or triple up or skip dents in order to get the density you want.
A museum in blog form.
Come read the stories behind objects and ephemera found in private collections, archives, and museums.